Curve dividing machine, also known as milling cutter dividing machine, is different from other types of board dividing machines. It mainly uses the high-speed rotating spindle to drive the milling cutter to segment multi connected PCB boards according to the path edited by the program with high precision. There are also classification methods of off-line, on-line, single table and double table.
It is quite different from the traditional hand breaking, cutting and stamping machines with the following characteristics:
1. 曲线分板机取代了人工折断、V-CUT或PUSH的切割瑕疵,大幅度的提高产品品质, 降低了报废率；
The curve splitter replaces the manual fracture, V-CUT or push cutting defects, greatly improves the product quality and reduces the scrap rate;
2. 用铣刀切割的时候，切割应力小，约为手掰式的1%， 冲压式的0.1%，较大的减小对PCBA板隐性的损伤。
When cutting with milling cutter, the cutting stress is small, which is about 1% of the hand breaking type and 0.1% of the stamping type, which can greatly reduce the hidden damage to PCBA plate.
The cutting accuracy of milling cutter is very high, the cutting surface is smooth and without burr. For customers with high requirements on products, it is recommended to select curve plate splitter;
Compared with the cutting machine, the aluminum plate dividing machine and the light strip dividing machine, it has higher flexibility and better applicability.
In the previous communication with customers, we found that customers are actually very concerned about whether we are real manufacturers and whether we have enough strength on the curve splitter. For these problems, I think Yushun power splitter can meet all your needs. Why do you say that?